11-119A Pro-Tec Yamaha FX-1 701 extended ride plate – Silver
The research and development engineers at Pro-Tec have spent countless hours testing various ride plate designs for the Yamaha FX-1 701 stand up hull while developing our extended ride plate. To improve the performance of the Yamaha FX-1 701, Pro-Tec considers the many dynamics of water flow across the bottom of the hull and ride plate to produce the best possible extended ride plate available. Ride plate length, shape, lift and fit are all necessary for proper function and optimum performance from a ride plate. The Pro-Tec Yamaha FX-1 701 extended ride plate will improve handling, improve acceleration and reduce porpoising without sacrificing top speed. Handling and porpoising are improved by the additional lift created by the extended length to keep the bow of the hull planted in the water. Planting the bow of the hull into the water provides better and more precise cornering allowing you to go faster through the corners resulting in lower lap times and more success on the race course. Better handling also reduces fatigue allowing you to go faster for a longer period of time. It doesn’t matter if you are a professional racer, amateur free rider or weekend recreational rider, a Pro-Tec FX-1 701 extended ride plate will improve the performance of your boat and increase the fun factor for you.
All Pro-Tec extended ride plates are cast from A319 aluminum and heat treated for maximum strength. The 11-119A FX-1 701 extended ride plate is powder coated silver. Powder coating the ride plate provides corrosion protection and a long lasting professional finish. For the ultimate in performance it is recommended to use a Pro-Tec extended ride plate and Moflow intake grate (Part # 11-219MA) together. This combination will improve handling, reduce porpoising, improve acceleration, reduce jet pump cavitation and improve rough water hook up. The Pro-Tec FX-1 701 extended ride plate and Moflow intake grate have been used by Chris MacClugage to win multiple National Slalom Championships and World Slalom Championships. Some of the riders who have also used the Pro-Tec FX-1 701 ride plate and Moflow intake grate are Joe Kenney, Randy Laine, Taylor Curtis, Victor Sheldon, Brent Flambures, Rob Flores, Mike Yellich, Tera Laho, Jim Goodchild, Lisa Barsby, Ricky Sneddon, Topher Baretto, Paul Del Rosario and many others.
Pro-Tec extended ride plates are also available for many other Yamaha personal watercraft and offer the same performance benefits as our FX-1 701 extended ride plate. Pro-Tec Yamaha extended ride plates are available for the following models of Yamaha Wave Runners. All Pro-Tec extended ride plates are powder coated silver unless noted then they are powder coated black.
11-115A Yamaha VXR 650 11-115A Yamaha Pro VXR 701
11-116A Yamaha Wave Blaster 701 11-116A Yamaha Wave Blaster II 760
11-117A Yamaha Super Jet 650/701 90-07 +60mm 11-117F Yamaha Super Jet 650/701 90-07 (black)
11-118A Yamaha Wave Raider 701 Standard 11-120F Yamaha Wave Venture 701 (black) 11-120F Yamaha Wave Venture 760 (black) 11-120F Yamaha Wave Venture 1100 (black) 11-120F Yamaha XL760 (black) 11-120F Yamaha XL1200 (black) 11-122A Yamaha Wave Raider 701 Deluxe 11-122A Yamaha Wave Raider 760 11-122A Yamaha Wave Raider 1100 11-124A Yamaha GP760 11-124A Yamaha GP800 11-124A Yamaha GP1200 11-124F Yamaha GP760 (black) 11-124F Yamaha GP800 (black) 11-124F Yamaha GP1200 (black) 11-126F Yamaha XL800 (black) 11-126F Yamaha XL1200 Limited (black) 11-126F Yamaha SUV 1200 (black) 11-126F Yamaha XLT800 (black) 11-126F Yamaha XLT1200 (black) 11-132A Yamaha GP800R 11-132A Yamaha GP1200R 11-132A Yamaha GP1300R 11-132F Yamaha GP800R (black) 11-132F Yamaha GP1200R (black) 11-132F Yamaha GP1300R (black)
If you have never used a Pro-Tec product in the past rest assured that we take every precaution to make sure that every item we manufacture meets or exceeds the performance of the original equipment part you are replacing. We do not make “generic” one type fits all products. Every item that we develop is developed and tested on the specific model it was designed for. During our testing we set specific parameters that must be met or exceeded before we bring an item to market. If the item we are developing does not meet our specific parameters that item will be scrapped and we move on to the next item. Once we have developed and item that meets our standards we will do a small production run so we can re-test a production unit. Once the production unit is tested and verified that it meets our performance standards then and only then will we bring it to market so you can enjoy the rewards of our hard work and dedication to improving the performance of your Yamaha personal watercraft.
For more information about our products and service please check out our Facebook page or Blog.
You can also view Pro-Tec products on our website.